Abbandanak, S. Navid Hosseini
Effects of functionalized graphene nanoplatelets on the flexural behaviors of basalt fibers/epoxy composites [Volume 5, Issue 3, 2018, Pages 315-324]
Abdellahi, Sayyed Behzad
Numerical investigation of tensile behavior of composite reinforced with woven carbon and Kevlar fabrics by multi scale method [Volume 5, Issue 2, 2018, Pages 265-270]
Abdollahi Boraei, Seyyed Behnam
Preparation of SiO2/TiO2 ceramic nano composite coating by sol-gel method on carbon steel and study the properties of it against corrosive ion in treated wastewater [Volume 5, Issue 1, 2018, Pages 33-40]
Afzali, Daryoush
Preparation of SiO2/TiO2 ceramic nano composite coating by sol-gel method on carbon steel and study the properties of it against corrosive ion in treated wastewater [Volume 5, Issue 1, 2018, Pages 33-40]
Afzali Gorouh, Dariush
Production of uniform nanocomposite coating of polypyrrole carbon nanotube/ cadmium oxide to protect corrosion of austenitic stainless steel 304 [Volume 5, Issue 3, 2018, Pages 377-386]
Ahmadi, Alireza
Utilization of artificial neural networks for detection and classification of damages in composite plate-like structures via ultrasonic guided waves [Volume 5, Issue 3, 2018, Pages 343-352]
Ahmadi, Mohammad Saleh
Tensile and flexural properties of epoxy-date palm fiber composites [Volume 5, Issue 1, 2018, Pages 69-78]
Ahmadifard, Saeed
Fabrication and investigation of microstructutr and mechanical properties of A356-TiO2-Gr surface Hybrid nano composite by friction stir processing [Volume 5, Issue 1, 2018, Pages 61-68]
Akbari, Reza
Effect of CTBN liquid rubber and flexible diamine curing agent on epoxy/glass prepregs properties [Volume 5, Issue 1, 2018, Pages 25-32]
Akbari, Tayebe
An investigation on the static buckling behavior of laminated cylindrical composite shells with embedded SMA wires by experiment [Volume 5, Issue 4, 2019, Pages 551-564]
Alipour, Mohammad
Investigation of the microstructure and hardness of cast Al7068 nanocomposite reinforced with SiC nanoparticles [Volume 5, Issue 4, 2019, Pages 461-468]
Amini, Saeed
Statistical study of the effect of various machining parameters on delamination in drilling of carbon fiber reinforced composites [Volume 5, Issue 1, 2018, Pages 41-50]
Amoushahi, Hossein
Buckling analysis of composite cross-ply laminated plates under hygrothermal loads with delaminations using the finite strip method [Volume 5, Issue 3, 2018, Pages 437-450]
Ansari, Elham
The effect of middle layer material and thickness on the quasi-static energy absorption of FML [Volume 5, Issue 3, 2018, Pages 427-436]
Ansari Khalkhali, Reza
Micromechanical analysis of electro-elastic response of polymer composites reinforced with fuzzy fiber containing CNTs [Volume 5, Issue 4, 2019, Pages 485-498]
Ashenai Ghasemi, Faramarz
Experimental analysis of graphene nanoparticles and glass fibers effect on mechanical and thermal properties of polypropylene/EPDM based nanocomposites [Volume 5, Issue 2, 2018, Pages 169-176]
Ashenai Ghasemi, Faramarz
Experimental investigation on mechanical properties of hybrid nano-composite based on epoxy/ graphene nano-platelets/ carboxylated acrylonitrile butadiene rubber [Volume 5, Issue 3, 2018, Pages 395-402]
Ashkani, Parham
Finite element simulation of high velocity impact on polymer composite plates [Volume 5, Issue 2, 2018, Pages 157-168]
Ashofteh, Roya Sadat
The Effects of Temperature Level and Stress-to-Strength Ratio on Creep Behavior of Aluminum-Aluminum Single Lap Adhesive Joints [Volume 5, Issue 3, 2018, Pages 353-358]
Azadi, Mohammad
Failure mechanisms in open-hole laminated composites under tensile loading using acoustic emission [Volume 5, Issue 1, 2018, Pages 143-152]
Azadian, Mohammad
Three dimensional weft knitted sandwich composites under drop-weight impacts in different energy levels [Volume 5, Issue 2, 2018, Pages 271-278]
Azarnia, Amir hossein
Analytical modeling to predict dynamic response of Fiber-Metal Laminated Panel subjected to low velocity impact [Volume 5, Issue 3, 2018, Pages 331-342]
Azdast, Taher
Investigation of cell wall thickness and impact strength of polypropylene microcellular nanocomposite foams produced by batch process [Volume 5, Issue 1, 2018, Pages 135-142]
B
Bagherieh, Ali Reza
Three dimensional modeling of progressive damage in fiber reinforced materials base on invariant failure criteria [Volume 5, Issue 2, 2018, Pages 191-199]
Baraheni, Mohammad
Statistical study of the effect of various machining parameters on delamination in drilling of carbon fiber reinforced composites [Volume 5, Issue 1, 2018, Pages 41-50]
Beheshty, Mohammad Hosain
Effect of CTBN liquid rubber and flexible diamine curing agent on epoxy/glass prepregs properties [Volume 5, Issue 1, 2018, Pages 25-32]
C
Chaparian, Yoosof
Experimental and numerical investigation of high velocity impact resistance in fiber metal laminates [Volume 5, Issue 1, 2018, Pages 99-108]
D
Dabiryan, Hadi
A semi-empirical model to predict the low-velocity impact behavior of weft-knitted spacer fabrics reinforced composites [Volume 5, Issue 1, 2018, Pages 117-126]
Daneshpayeh, Sajad
Experimental analysis of graphene nanoparticles and glass fibers effect on mechanical and thermal properties of polypropylene/EPDM based nanocomposites [Volume 5, Issue 2, 2018, Pages 169-176]
Daneshpayeh, Sajjad
Experimental investigation on mechanical properties of hybrid nano-composite based on epoxy/ graphene nano-platelets/ carboxylated acrylonitrile butadiene rubber [Volume 5, Issue 3, 2018, Pages 395-402]
Dariushi, Soheil
Experimental and numerical investigation of sandwich panels with bilateral connection under static loading [Volume 5, Issue 3, 2018, Pages 415-426]
Daryadel, Mahsa
Investigation of cell wall thickness and impact strength of polypropylene microcellular nanocomposite foams produced by batch process [Volume 5, Issue 1, 2018, Pages 135-142]
E
Elhami, Mozhgan
A Study on morphology of Poly(vinyl alcohol)- organoclay nanocomposite nanofibers [Volume 5, Issue 3, 2018, Pages 325-330]
Esfandeh, Masoud
Improvement of delamination resistance of glass-phenolic composites through matrix toughening mechanism using poly (vinyl butyral) [Volume 5, Issue 4, 2019, Pages 521-528]
Eslami-Farsani, reza
Effect of Surface Modification of Graphene Nanoplatelets on the High Velocity Impact Behavior of Basalt Fibers Reinforced Polymer-Based Composites [Volume 5, Issue 1, 2018, Pages 109-116]
Eslami-Farsani, Reza
Investigation of the microstructure and hardness of cast Al7068 nanocomposite reinforced with SiC nanoparticles [Volume 5, Issue 4, 2019, Pages 461-468]
Eslami-Farsani, Reza
Mechanical performance of self-healing fiber-metal laminates under transverse loading [Volume 5, Issue 2, 2018, Pages 185-190]
Esmaeili-Bidhendi, Mehdi
Preparation of SiO2/TiO2 ceramic nano composite coating by sol-gel method on carbon steel and study the properties of it against corrosive ion in treated wastewater [Volume 5, Issue 1, 2018, Pages 33-40]
F
Faraji, Mahya
Improvement of delamination resistance of glass-phenolic composites through matrix toughening mechanism using poly (vinyl butyral) [Volume 5, Issue 4, 2019, Pages 521-528]
Fazeli, Mohammadreza
Fabrication of magnesium sheet with magnesium matrix surface composite to improve hardness and wear properties [Volume 5, Issue 4, 2019, Pages 575-582]
Fazilati, Jamshid
Thermal Stability of FGM Cylindrical Shells on Pasternak Elastic Foundation under Axial Load [Volume 5, Issue 2, 2018, Pages 200-207]
Fouladi, Ali
Prediction and control of the mechanical properties of braided composite by controlling the braid angle using the micro-mechanical relationships for each of the flat faces of mandrel [Volume 5, Issue 4, 2019, Pages 595-604]
G
Ganjiani, Seyed Mehdi
Finite element simulation of high velocity impact on polymer composite plates [Volume 5, Issue 2, 2018, Pages 157-168]
Gerami, Gholamreza
Experimental and numerical investigation of high velocity impact resistance in fiber metal laminates [Volume 5, Issue 1, 2018, Pages 99-108]
Ghaffari, Mehdi
Curing kinetic of micro and nano composites based on styrenine butadiene rubber contains zinc oxide [Volume 5, Issue 2, 2018, Pages 253-264]
Ghanadi, Ahmad
Experimental and numerical free vibration analysis of composite sandwich cylindrical shells with lozenge cores [Volume 5, Issue 4, 2019, Pages 469-478]
Ghanbarzadeh, Afshin
Energy Harvesting from Laminated Composite Beam with a Piezoelectric Layer under Forced Vibrations [Volume 5, Issue 2, 2018, Pages 227-237]
Ghannadpour, Seyyed Amir Mahdi
Ultimate strength analysis of imperfect composite plates under both in-plane compressive load and lateral pressure using Ritz method [Volume 5, Issue 1, 2018, Pages 1-10]
Ghasemi, Ismail
Experimental analysis of graphene nanoparticles and glass fibers effect on mechanical and thermal properties of polypropylene/EPDM based nanocomposites [Volume 5, Issue 2, 2018, Pages 169-176]
Ghasemi, Ismail
Experimental investigation on mechanical properties of hybrid nano-composite based on epoxy/ graphene nano-platelets/ carboxylated acrylonitrile butadiene rubber [Volume 5, Issue 3, 2018, Pages 395-402]
Ghasemi-Ghalebahman, Ahmad
Failure mechanisms in open-hole laminated composites under tensile loading using acoustic emission [Volume 5, Issue 1, 2018, Pages 143-152]
Gholami, Maryam
Tensile and flexural properties of epoxy-date palm fiber composites [Volume 5, Issue 1, 2018, Pages 69-78]
Golparvar, Mona
Investigation of mechanical properties of polypropylene-based hybrid nanocomposites using experimental design [Volume 5, Issue 3, 2018, Pages 307-314]
Goodarzian, Farshad
Buckling analysis of composite cross-ply laminated plates under hygrothermal loads with delaminations using the finite strip method [Volume 5, Issue 3, 2018, Pages 437-450]
H
Habibi, Neda
Curing kinetic of micro and nano composites based on styrenine butadiene rubber contains zinc oxide [Volume 5, Issue 2, 2018, Pages 253-264]
Habibi, Sima
A Study on morphology of Poly(vinyl alcohol)- organoclay nanocomposite nanofibers [Volume 5, Issue 3, 2018, Pages 325-330]
Hadi, Abbas
Thermal Stability of FGM Cylindrical Shells on Pasternak Elastic Foundation under Axial Load [Volume 5, Issue 2, 2018, Pages 200-207]
Haghighi Yazdi, Mojtaba
Numerical investigation of the effect of material strain rate dependent properties on high velocity impact behavior and ballistic limit velocity of honeycomb structures [Volume 5, Issue 4, 2019, Pages 511-520]
Hasanalizadeh, Fatemeh
A semi-empirical model to predict the low-velocity impact behavior of weft-knitted spacer fabrics reinforced composites [Volume 5, Issue 1, 2018, Pages 117-126]
Hasani, Hossein
Three dimensional weft knitted sandwich composites under drop-weight impacts in different energy levels [Volume 5, Issue 2, 2018, Pages 271-278]
Hasanzadeh, Rezgar
Investigation of cell wall thickness and impact strength of polypropylene microcellular nanocomposite foams produced by batch process [Volume 5, Issue 1, 2018, Pages 135-142]
Hashemi, Ramin
Preparation of SiO2/TiO2 ceramic nano composite coating by sol-gel method on carbon steel and study the properties of it against corrosive ion in treated wastewater [Volume 5, Issue 1, 2018, Pages 33-40]
Hashemi, Ramin
Evaluation of mechanical properties and microstructure for Al/Ni %5 produced by cross accumulative roll bonding process [Volume 5, Issue 2, 2018, Pages 279-288]
Hashemi, Ramin
Review of mechanical and microstructural properties of aluminum matrix composites reinforced with ceramic particles produced by SPD processes [Volume 5, Issue 4, 2019, Pages 583-594]
Hassanzadeh-Aghdam, mohammad kazem
Micromechanical analysis of electro-elastic response of polymer composites reinforced with fuzzy fiber containing CNTs [Volume 5, Issue 4, 2019, Pages 485-498]
Heidarpour, Akbar
Fabrication and investigation of microstructutr and mechanical properties of A356-TiO2-Gr surface Hybrid nano composite by friction stir processing [Volume 5, Issue 1, 2018, Pages 61-68]
Hejazi, Sayyed Mahdi
Numerical investigation of tensile behavior of composite reinforced with woven carbon and Kevlar fabrics by multi scale method [Volume 5, Issue 2, 2018, Pages 265-270]
Hoseini, Malihe
Curing kinetic of micro and nano composites based on styrenine butadiene rubber contains zinc oxide [Volume 5, Issue 2, 2018, Pages 253-264]
Hosseini Kordkheili, Seyed Ali
Development of a layer-wise model together with J-integral method for prediction of interlaminar crack growth in laminated composites plates [Volume 5, Issue 2, 2018, Pages 218-226]
Hosseini Toudashki, Hossein
Evaluation of variation in the mechanical properties of composite laminates using progressive failure analysis [Volume 5, Issue 1, 2018, Pages 51-60]
J
Jabbari Mostahsan, Amirhossein
Fabrication of magnesium sheet with magnesium matrix surface composite to improve hardness and wear properties [Volume 5, Issue 4, 2019, Pages 575-582]
Jafari, Aliasghar
Hydroelastic vibration analysis of functionally graded circular plate in contact with bounded fluid by Ritz method [Volume 5, Issue 4, 2019, Pages 529-538]
Jafari, Seyed Mohammad
Failure mechanisms in open-hole laminated composites under tensile loading using acoustic emission [Volume 5, Issue 1, 2018, Pages 143-152]
Jahanpour, Ali Reza
Three dimensional modeling of progressive damage in fiber reinforced materials base on invariant failure criteria [Volume 5, Issue 2, 2018, Pages 191-199]
Jalilian, Hadis
Investigation on the Microstructure and Properties of PVC Toughened with DOP/PMMA/Nano-Graphene [Volume 5, Issue 3, 2018, Pages 451-456]
Jamshidi, Hajar
Effect of CTBN liquid rubber and flexible diamine curing agent on epoxy/glass prepregs properties [Volume 5, Issue 1, 2018, Pages 25-32]
K
Kabir, Mohammad Zaman
Evaluation of variation in the mechanical properties of composite laminates using progressive failure analysis [Volume 5, Issue 1, 2018, Pages 51-60]
Kabiri2, Abdulreza
Experimental and numerical investigation of high velocity impact resistance in fiber metal laminates [Volume 5, Issue 1, 2018, Pages 99-108]
Kashani, Hossein
Development of a layer-wise model together with J-integral method for prediction of interlaminar crack growth in laminated composites plates [Volume 5, Issue 2, 2018, Pages 218-226]
Kashfi, Mohammad
The effect of middle layer material and thickness on the quasi-static energy absorption of FML [Volume 5, Issue 3, 2018, Pages 427-436]
Kazemi Asfeh, Majid
Numerical investigation of tensile behavior of composite reinforced with woven carbon and Kevlar fabrics by multi scale method [Volume 5, Issue 2, 2018, Pages 265-270]
Kazemi khasrag, Elahe
Effect of Surface Modification of Graphene Nanoplatelets on the High Velocity Impact Behavior of Basalt Fibers Reinforced Polymer-Based Composites [Volume 5, Issue 1, 2018, Pages 109-116]
Khaje Arzani, Hamid
Experimental and numerical investigation of high velocity impact resistance in fiber metal laminates [Volume 5, Issue 1, 2018, Pages 99-108]
Khajeh Mehrizi, Mohammad
Tensile and flexural properties of epoxy-date palm fiber composites [Volume 5, Issue 1, 2018, Pages 69-78]
Khalili, Seyed Mohammad Reza
Experimental and numerical investigation on semi-cylindrical compositelatticereinforced with triangular cellssubjected to high velocity impact [Volume 5, Issue 2, 2018, Pages 208-217]
Khalili, Seyed Mohammad Reza
An investigation on the static buckling behavior of laminated cylindrical composite shells with embedded SMA wires by experiment [Volume 5, Issue 4, 2019, Pages 551-564]
Khamari, Mohsen
Compression and impact strength study of aluminum-alumina granule composite by squeez-casting method [Volume 5, Issue 3, 2018, Pages 387-394]
Khatibi, Mohamd Mahdi
Investigation of skin/core debonding effects on the natural frequencies of composite sandwich structures using experimental and numerical modal analysis [Volume 5, Issue 1, 2018, Pages 91-98]
Khavandi, Alireza
Effect of Nitinol Addition on the Mechanical properties and the Microstructure of Nactural Hydroxyapatite Obtained from Calf Femoral Bone [Volume 5, Issue 2, 2018, Pages 238-244]
Khodabakhshi, Majid
A Study of layer strength in composite Al 1050/SS 316 manufactured by Accumulative Roll bonding process [Volume 5, Issue 4, 2019, Pages 479-484]
Khodaee, Fatemeh
Fabrication and investigation of microstructutr and mechanical properties of A356-TiO2-Gr surface Hybrid nano composite by friction stir processing [Volume 5, Issue 1, 2018, Pages 61-68]
Khodaei, Meysam
Numerical investigation of the effect of material strain rate dependent properties on high velocity impact behavior and ballistic limit velocity of honeycomb structures [Volume 5, Issue 4, 2019, Pages 511-520]
Khoramishad, Hadi
The Effects of Temperature Level and Stress-to-Strength Ratio on Creep Behavior of Aluminum-Aluminum Single Lap Adhesive Joints [Volume 5, Issue 3, 2018, Pages 353-358]
Khorasani, Reza
Development of a layer-wise model together with J-integral method for prediction of interlaminar crack growth in laminated composites plates [Volume 5, Issue 2, 2018, Pages 218-226]
Khosravi, Hamed
Mechanical performance of self-healing fiber-metal laminates under transverse loading [Volume 5, Issue 2, 2018, Pages 185-190]
Khosravi, Morteza
Compression and impact strength study of aluminum-alumina granule composite by squeez-casting method [Volume 5, Issue 3, 2018, Pages 387-394]
KIANI, ALI
Prediction and control of the mechanical properties of braided composite by controlling the braid angle using the micro-mechanical relationships for each of the flat faces of mandrel [Volume 5, Issue 4, 2019, Pages 595-604]
Kurkaani Barvaj, Abbas
Ultimate strength analysis of imperfect composite plates under both in-plane compressive load and lateral pressure using Ritz method [Volume 5, Issue 1, 2018, Pages 1-10]
M
Mahmoodi, Masoud
A Study of layer strength in composite Al 1050/SS 316 manufactured by Accumulative Roll bonding process [Volume 5, Issue 4, 2019, Pages 479-484]
Mahmoudian, Alireza
Production of uniform nanocomposite coating of polypyrrole carbon nanotube/ cadmium oxide to protect corrosion of austenitic stainless steel 304 [Volume 5, Issue 3, 2018, Pages 377-386]
Maleki Khorasgani, Ali-reza
Investigation of the physical and mechanical properties of Wood plastic composites based on high density polyethylene/ polypropylene/recycled poly (ethylene terephthalate) [Volume 5, Issue 1, 2018, Pages 127-134]
Malekzade Fard, Keramat
Experimental, numerical and analytical study of energy absorption in high velocity penetration phenomena on composite targets. [Volume 5, Issue 1, 2018, Pages 11-24]
Malekzade Fard, Keramat
Experimental and numerical study of Energy Absorption in foam filled Trapezoidal Compound core sandwich panels subjected to quasi-static loading. [Volume 5, Issue 4, 2019, Pages 565-574]
Malekzadeh-Fard, Keramat
Analytical modeling to predict dynamic response of Fiber-Metal Laminated Panel subjected to low velocity impact [Volume 5, Issue 3, 2018, Pages 331-342]
Mir Mohammad Hossein Ahari1, Seyed Mahyar
Experimental and numerical investigation on semi-cylindrical compositelatticereinforced with triangular cellssubjected to high velocity impact [Volume 5, Issue 2, 2018, Pages 208-217]
Mobasheri, Mersad
The Effects of Temperature Level and Stress-to-Strength Ratio on Creep Behavior of Aluminum-Aluminum Single Lap Adhesive Joints [Volume 5, Issue 3, 2018, Pages 353-358]
Moeini Afzal, Morteza
Statistical study of the effect of various machining parameters on delamination in drilling of carbon fiber reinforced composites [Volume 5, Issue 1, 2018, Pages 41-50]
Mohammadzadeh, Alireza
Hydroelastic vibration analysis of functionally graded circular plate in contact with bounded fluid by Ritz method [Volume 5, Issue 4, 2019, Pages 529-538]
Molani, Siamak
Investigation of cell wall thickness and impact strength of polypropylene microcellular nanocomposite foams produced by batch process [Volume 5, Issue 1, 2018, Pages 135-142]
Moradi, Mahdi
Three dimensional modeling of progressive damage in fiber reinforced materials base on invariant failure criteria [Volume 5, Issue 2, 2018, Pages 191-199]
Mosalmani, Reza
Energy Harvesting from Laminated Composite Beam with a Piezoelectric Layer under Forced Vibrations [Volume 5, Issue 2, 2018, Pages 227-237]
N
Naderi, Ghasem
Investigation on the Microstructure and Properties of PVC Toughened with DOP/PMMA/Nano-Graphene [Volume 5, Issue 3, 2018, Pages 451-456]
Najafzade Asl, omid
Experimental Investigation of the Effect of Different Parameters on the Behavior of Glass / Epoxy Composite Tubes under quasi-Static axial Loading [Volume 5, Issue 4, 2019, Pages 499-510]
Nazari, Alireza
Evaluation of variation in the mechanical properties of composite laminates using progressive failure analysis [Volume 5, Issue 1, 2018, Pages 51-60]
Nouri-Niyaraki, Meysam
Experimental analysis of graphene nanoparticles and glass fibers effect on mechanical and thermal properties of polypropylene/EPDM based nanocomposites [Volume 5, Issue 2, 2018, Pages 169-176]
O
Osfouri, Masoud
An Experimental investigation on nitinol shape memory alloy reinforced GLAREs against Charpy low velocity impact [Volume 5, Issue 3, 2018, Pages 403-414]
Ovesy, Hamid Reza
Thermal Stability of FGM Cylindrical Shells on Pasternak Elastic Foundation under Axial Load [Volume 5, Issue 2, 2018, Pages 200-207]
P
Payganeh, Gholamhasan
Experimental and Finite Element Investigation of Hot Gas Forming Process of A6063-AZ80 Bi-layered Composite Tubes using Taguchi Methods for Design of Experiments [Volume 5, Issue 1, 2018, Pages 79-90]
Pol, Mohammad Hosein
Experimental Investigation of the Effect of Different Parameters on the Behavior of Glass / Epoxy Composite Tubes under quasi-Static axial Loading [Volume 5, Issue 4, 2019, Pages 499-510]
Pourang, Hassan
The Effects of Temperature Level and Stress-to-Strength Ratio on Creep Behavior of Aluminum-Aluminum Single Lap Adhesive Joints [Volume 5, Issue 3, 2018, Pages 353-358]
R
Raafat, Mohammad-Reza
Prediction of the critical buckling load of composite cylindrical shells by using Vibration Correlation Technique [Volume 5, Issue 3, 2018, Pages 359-368]
Rahimi, Gholamhossein
Experimental and numerical free vibration analysis of composite sandwich cylindrical shells with lozenge cores [Volume 5, Issue 4, 2019, Pages 469-478]
Rahimi, Gholam-Hossein
Prediction of the critical buckling load of composite cylindrical shells by using Vibration Correlation Technique [Volume 5, Issue 3, 2018, Pages 359-368]
Rahmani, Kaveh
The effect of middle layer material and thickness on the quasi-static energy absorption of FML [Volume 5, Issue 3, 2018, Pages 427-436]
Rahmani, Omid
An Experimental investigation on nitinol shape memory alloy reinforced GLAREs against Charpy low velocity impact [Volume 5, Issue 3, 2018, Pages 403-414]
Rahmani, Rahmatollah
Investigation of skin/core debonding effects on the natural frequencies of composite sandwich structures using experimental and numerical modal analysis [Volume 5, Issue 1, 2018, Pages 91-98]
Rahmatabadi, Davood
Evaluation of mechanical properties and microstructure for Al/Ni %5 produced by cross accumulative roll bonding process [Volume 5, Issue 2, 2018, Pages 279-288]
Rahmatabadi, Davood
Review of mechanical and microstructural properties of aluminum matrix composites reinforced with ceramic particles produced by SPD processes [Volume 5, Issue 4, 2019, Pages 583-594]
Rezaei, Mostafa
Experimental Investigation on the Foaming Dynamics and Cell Microstructure of Polystyrene/Nanosilica/n-Pentane Nanocomposites [Volume 5, Issue 2, 2018, Pages 289-301]
Rezaei Golshan, Nabiollah
Experimental Investigation of the Effect of Different Parameters on the Behavior of Glass / Epoxy Composite Tubes under quasi-Static axial Loading [Volume 5, Issue 4, 2019, Pages 499-510]
Riahi, Mohammad
Utilization of artificial neural networks for detection and classification of damages in composite plate-like structures via ultrasonic guided waves [Volume 5, Issue 3, 2018, Pages 343-352]
Roknian, Masoud
Fabrication and investigation of microstructutr and mechanical properties of A356-TiO2-Gr surface Hybrid nano composite by friction stir processing [Volume 5, Issue 1, 2018, Pages 61-68]
Roudini, Ghodratollah
Compression and impact strength study of aluminum-alumina granule composite by squeez-casting method [Volume 5, Issue 3, 2018, Pages 387-394]
S
Saberian, Mohammad Hossein
Experimental investigation on mechanical properties of hybrid nano-composite based on epoxy/ graphene nano-platelets/ carboxylated acrylonitrile butadiene rubber [Volume 5, Issue 3, 2018, Pages 395-402]
Sadighi, Mojtaba
A semi-empirical model to predict the low-velocity impact behavior of weft-knitted spacer fabrics reinforced composites [Volume 5, Issue 1, 2018, Pages 117-126]
Sadighi, Mojtaba
Experimental and numerical investigation of sandwich panels with bilateral connection under static loading [Volume 5, Issue 3, 2018, Pages 415-426]
Safarabadi, Majid
Finite element simulation of high velocity impact on polymer composite plates [Volume 5, Issue 2, 2018, Pages 157-168]
Safarabadi Farahani, Majid
Numerical investigation of the effect of material strain rate dependent properties on high velocity impact behavior and ballistic limit velocity of honeycomb structures [Volume 5, Issue 4, 2019, Pages 511-520]
Salehi, Mostafa
Experimental Investigation on the Foaming Dynamics and Cell Microstructure of Polystyrene/Nanosilica/n-Pentane Nanocomposites [Volume 5, Issue 2, 2018, Pages 289-301]
SARAEI, ALIREZA
Prediction and control of the mechanical properties of braided composite by controlling the braid angle using the micro-mechanical relationships for each of the flat faces of mandrel [Volume 5, Issue 4, 2019, Pages 595-604]
SarfeJoo, MohammadAli
Production of uniform nanocomposite coating of polypyrrole carbon nanotube/ cadmium oxide to protect corrosion of austenitic stainless steel 304 [Volume 5, Issue 3, 2018, Pages 377-386]
Sayyar, Hassan
Failure mechanisms in open-hole laminated composites under tensile loading using acoustic emission [Volume 5, Issue 1, 2018, Pages 143-152]
Sedigh1, Yaser
Experimental and numerical investigation on semi-cylindrical compositelatticereinforced with triangular cellssubjected to high velocity impact [Volume 5, Issue 2, 2018, Pages 208-217]
Sedighi, Mohammad
Fabrication of magnesium sheet with magnesium matrix surface composite to improve hardness and wear properties [Volume 5, Issue 4, 2019, Pages 575-582]
Setoodeh, AliReza
Theoretical and experimental study on the effect of multi-walled carbon nanotubes on improving the tensile properties and toughness of Vinyl ester resin [Volume 5, Issue 4, 2019, Pages 539-550]
Shahbazi Karami, Javad
Experimental and Finite Element Investigation of Hot Gas Forming Process of A6063-AZ80 Bi-layered Composite Tubes using Taguchi Methods for Design of Experiments [Volume 5, Issue 1, 2018, Pages 79-90]
Shahgholian-Ghahfarokhi, Davoud
Prediction of the critical buckling load of composite cylindrical shells by using Vibration Correlation Technique [Volume 5, Issue 3, 2018, Pages 359-368]
Shahgholian-Ghahfarokhi, Davoud
Experimental and numerical free vibration analysis of composite sandwich cylindrical shells with lozenge cores [Volume 5, Issue 4, 2019, Pages 469-478]
Shahrajabian, Hamzeh
Investigation of the physical and mechanical properties of Wood plastic composites based on high density polyethylene/ polypropylene/recycled poly (ethylene terephthalate) [Volume 5, Issue 1, 2018, Pages 127-134]
Shahrokhian Dehkordi, Mohammad Amin
Experimental and Finite Element Investigation of Hot Gas Forming Process of A6063-AZ80 Bi-layered Composite Tubes using Taguchi Methods for Design of Experiments [Volume 5, Issue 1, 2018, Pages 79-90]
Shakhesi, Saeed
Thermal Stability of FGM Cylindrical Shells on Pasternak Elastic Foundation under Axial Load [Volume 5, Issue 2, 2018, Pages 200-207]
Shokoohi, Shirin
Investigation on the Microstructure and Properties of PVC Toughened with DOP/PMMA/Nano-Graphene [Volume 5, Issue 3, 2018, Pages 451-456]
Shokrieh, Mahmood Mehrdad
Three dimensional weft knitted sandwich composites under drop-weight impacts in different energy levels [Volume 5, Issue 2, 2018, Pages 271-278]
Siadati, Hossein
Effect of Surface Modification of Graphene Nanoplatelets on the High Velocity Impact Behavior of Basalt Fibers Reinforced Polymer-Based Composites [Volume 5, Issue 1, 2018, Pages 109-116]
Siadati, Mohammad Hossein
Effects of functionalized graphene nanoplatelets on the flexural behaviors of basalt fibers/epoxy composites [Volume 5, Issue 3, 2018, Pages 315-324]
Sokhandani, Navid
Theoretical and experimental study on the effect of multi-walled carbon nanotubes on improving the tensile properties and toughness of Vinyl ester resin [Volume 5, Issue 4, 2019, Pages 539-550]
Soltani, Hossain
The comparison in corrosion behavior of Fe-Ni-Cr composite coatings reinforced by SiC nanoparticles and carbon nanotubes [Volume 5, Issue 3, 2018, Pages 369-376]
T
Taheri-Behrooz, Fathollah
Electrical conductivity enhancement of Carbon/Epoxy composites using nanoparticles [Volume 5, Issue 4, 2019, Pages 605-614]
Tavanaie, Mohammad Ali
Tensile and flexural properties of epoxy-date palm fiber composites [Volume 5, Issue 1, 2018, Pages 69-78]
Tavoosi, Majid
The comparison in corrosion behavior of Fe-Ni-Cr composite coatings reinforced by SiC nanoparticles and carbon nanotubes [Volume 5, Issue 3, 2018, Pages 369-376]
Torabizadeh, Mohammad Amin
Response of aluminum foam sandwiches under low rate impact [Volume 5, Issue 2, 2018, Pages 177-184]
V
Vahdanifar, Hossein
Energy Harvesting from Laminated Composite Beam with a Piezoelectric Layer under Forced Vibrations [Volume 5, Issue 2, 2018, Pages 227-237]
Z
Zamani, Mohammad Reza
An Experimental investigation on nitinol shape memory alloy reinforced GLAREs against Charpy low velocity impact [Volume 5, Issue 3, 2018, Pages 403-414]
Zarei, Mehdi
Experimental Investigation on the Foaming Dynamics and Cell Microstructure of Polystyrene/Nanosilica/n-Pentane Nanocomposites [Volume 5, Issue 2, 2018, Pages 289-301]
Zebarjad, Seyed Mojtaba
Theoretical and experimental study on the effect of multi-walled carbon nanotubes on improving the tensile properties and toughness of Vinyl ester resin [Volume 5, Issue 4, 2019, Pages 539-550]
Zolghadr, Naser
Analytical modeling to predict dynamic response of Fiber-Metal Laminated Panel subjected to low velocity impact [Volume 5, Issue 3, 2018, Pages 331-342]